The Plastics Distributor and Fabricator - Your Industry Magazine
The Plastics Distributor and Fabricator, Your Industry Magazine
Plastic Spacer
News Features Series Articles Columns
Plastic Spacer
Return Home
Article Keyword Search
 
ARTICLES
Category: Tooling
Volume: 22
Issue: 3
Article No.: 3250

BROWSE ARTICLES
BY CATEGORY: < Previous | Next >
BY ISSUE: < Previous | Next >
Back To Article Directory - May/Jun-01


Single Flute Carbide Cutter
Safranek Enterprises introduced a new line of small diameter screw-on carbide cutters, the "P Series", which can plunge cut, have greater chip clearance, and run cooler. The cutters are single flute, cam ground, solid carbide with improved chip clearance, and available from 1/8" to 3/8" - the 3/8" even has a reverse helix down shear. The combination makes for a durable small diameter cutter.

"Because of the grind and chip clearance these cutters run cooler," explains Safranek vice president Linda Wyant, "this allows for cutting plastics without welding."

The photo shows a cut made with a standard two flute cutter and a cut made with the New P-Series cutter (foreground).

Safranek Enterprises has also been manufacturing Her-Saf Panel Routers and related equipment for 38 years.

For more information, contact Linda Wyant, Safranek Enterprises, Inc., 4005 El Camino Real, Atascadero, CA 93422, 805-466-1563, E-mail: sales@hersaf.com.

Return Home | Back To Top
Plastic Spacer

 
Copyright © 2024
Plastics Distributor® & Fabricator Magazine
P.O. Box 669
LaGrange, Illinois 60525-0669
All Rights Reserved.
Header Image courtesy of Nylatech, Inc.

Phone: (708) 588-1845
Fax: (708) 588-1846
Email Us