The Plastics Distributor and Fabricator - Your Industry Magazine
The Plastics Distributor and Fabricator, Your Industry Magazine
Plastic Spacer
News Features Series Articles Columns
Plastic Spacer
Return Home
Article Keyword Search
 
ARTICLES
Category: Machinery
Volume: 21
Issue: 5
Article No.: 3014

BROWSE ARTICLES
BY CATEGORY: < Previous | Next >
BY ISSUE: < Previous | Next >
Back To Article Directory - Sep/Oct-00


LASER CUTTER

The new Jamieson LC2 Laser Center. is a fixed table and three axes lightweight gantry system. This allows a stationary workpiece that does not require clamping. The mass to be moved is therefore minimal allowing high accelerations and contouring speeds for cutting, drilling, welding and engraving operations.

No maintenance, sealed beam CO2 lasers are used, which are able to run over 10 years at 1 shift before requiring refilling. They are available from 100 to 500 Watts of power to produce from a variety of materials including plastics.

The laser center is available in a 4'x4' or 5'x10' table with vacuum system and chiller. Options include automatic material handling, autofocus, split beam optics, and additional axes.

For more information, Write no. 609 on the Reader Service Card between pages 20/21 or 36/37 or see e-Reader Service at www.plasticsmag.com.

Return Home | Back To Top
Plastic Spacer

 
Copyright © 2024
Plastics Distributor® & Fabricator Magazine
P.O. Box 669
LaGrange, Illinois 60525-0669
All Rights Reserved.
Header Image courtesy of Nylatech, Inc.

Phone: (708) 588-1845
Fax: (708) 588-1846
Email Us