Nylon & Acetal Shapes
Flame-Resistant, Lightweight Extruded Nylon
6 FR, a lightweight,
nylon, to their
product line-up. Sustamid 6 FR sheets and rods have a
very high LOI (Limiting Oxygen Index) of 40% and are
halogen-free. This high-strength, rigid nylon is best used in
applications with high demands for both flame and wear
resistance like cable clamps and wear guides for the aerospace,
rail car, shipbuilding and mining industries. The
new material meets specifications for rail and aerospace,
including but not limited to, NFPA130 and the new
European Rail Vehicle Standard DIN EN 45545-2:2013.
This newly developed material facilitates production of
large-sized machined components and component parts in
small piece numbers. Machined parts made of flame-retardant
polyamide 6 could previously only be manufactured by
injection moulding due to technical limitations. This meant
that large dimensions and small piece numbers could not be
economically produced due to the high tool costs.
Sustamid 6 FR is just the latest innovative product
added the full line-up of the Röchling Acetal and nylon
material offering that includes Sustarin® C (Acetal copolymer),
Sustarin® H (Acetal homopolymer/Delrin®),
Sustarin® H AF and AF DE588 (Acetal homopolymer AF
blends), Sustamid® 6G (cast nylon) and Sustamid® 66
(extruded nylon). Röchling high-performance acetal and
nylon products have excellent mechanical and electrical
properties with the ability to maintain their physical
integrity under thermal and electrical stressors at elevated
For more information, contact Dena Jenkins, Röchling
Engineering Plastics, 903 Gastonia Technology Pkwy.,
Dallas, NC 28034, 704-884-3506, E-mail; email@example.com, Web: www.roechling.com/us.
Petro Extrusion Technologies, Inc. (PET), extrudes custom
and stock nylon shapes, in FDA, heat-stabilized and MDS
filled grades of Nylon 6 and Nylon 12. Semi-rigid or flexible
grades are available for most custom shapes. Profiles can
be made in natural, standard or custom colors as required.
Petro also offers custom cut to length capabilities.
GR profiles are
best suited to
are also excellent
as striker plates and liners, these profiles require no
lubrication to lessen friction.
PET can also custom extrude profiles based on customer
For more information, contact Mike Patterson or
Julie Hanan, Petro Extrusion Technologies, Inc., 205B Hallock Ave., Middlesex, NJ 08846, 800-229-3338/908-789-3338, Fax: 908-789-0434, E-mail: firstname.lastname@example.org, Web: www.petroextrusions.com.
Acetal Rod & Sheet
In addition to
acetal rod and
Acetal offers high
strength and a resistance to impact and fatigue with a low
coefficient of friction and good wear properties especially
in wet environments.
Their full line manufacturing capabilities allow for the
production of all your stock shape needs as well as semifinished
and finished custom cast components for
increased savings and quick turnarounds.
Nylatech advantages include: custom orders manufactured
in one week or less; same day shipping for in-stock
items and short pours and flexible manufacturing for
unique non-stock requirements.
Nylatech acetal offers low moisture absorption, high
strength and stiffness, easy machining capabilities and is
FDA & NSF compliant.
The material comes in natural and black in rod ." dia.
to 6" dia. from stock and plate ." through 2" in 4 x 10'
and 2." through 4" in 2 x 4'. Custom sizes are available
to improve part yield and reduce material cost.
Nylatech are specialists in manufacturing cast nylon 6
and 6/12 as rod, sheet and tubular bar as well as finished
or semi-finished custom cast components. Available in a
variety of grades including Nylatech® Oil, PVM, SL and
Nythane™, these materials offer a range of properties
from self-lubricating with a low coefficient of friction to
increased impact resistance.
For more information, contact Calvin Petersen,
Nylatech, Inc., P.O. Box 455, Everson, WA 98247, 800-506-9566/360-966-2838, Fax: 360-966-2838, E-mail:
email@example.com, Web: www.nylatech.com.
High Tensile Strength,
Creep & Fatigue
stock shapes are
DuPont Delrin resin.
They possess high
creep and fatigue
DuPont Delrin stock
shapes made by
Ensinger because of their increased physical properties,
which can be as much as 20% higher than other acetals.
Ensinger uses a proprietary extrusion process that produces
shapes with lower stress and better dimensional stability
that leads to consistent and reliable mechanical parts.
Delrin stock shapes exhibit low moisture adsorption and
are chemically resistant to hydrocarbons, solvents, and neutral
While these properties are impressive, it is the material’s
significantly better fatigue endurance that makes
Ensinger Delrin much more ideal for most industrial
applications than its acetal copolymer counterparts. It is
a popular choice for manufactured plastic gears. As automotive
engineers look to reduce weight, improve energy
efficiency and fuel economy, as well as lower noise output,
Delrin has become increasingly popular. Its higher
strength characteristics and better fatigue endurance
make it an excellent choice to replace metal gears while
maintaining or improving long term performance. Other
popular applications include auto safety system components;
conveyor parts, such as bushings and bearing
housings; fasteners and clips; fuel system components;
and home appliance parts.
For more information, contact Bruce Dickinson,
Ensinger, 365 Meadowlands Blvd., Washington, PA
15301, 800-243-3221/856-227-0500, Fax: 724-746-9209, E-mail: firstname.lastname@example.org, Web: www.ensingerplastic.com.
24" Acetal Rods
GEHR GmbH from
is the first to successfully
acetal (POM-C) rods
with a diameter of
24” (600 mm). This
outperforms the current
diameter of 500 mm. The rod is available from stock
in natural color in 39” (1.0 m) lengths or can be cut to size
to meet your requirement.
Founded in 1932, and still owned by the Gehr family,
GEHR GmbH has a workforce of 250 and is one of the
world's leading manufacturers of thermoplastic semifinished
products. The company extrudes a variety of products:
thermoplastic pipes, rods, profiles and plates. The
range of materials extends from standard plastics such as
PVC, PP, PE, PE-UHMW, PMMA, to industrial plastics
such as POM, PA, PET, and high-performance plastics like
PVDF, PPS, and PEEK.
For more information, contact Greg Martino, GEHR
Plastics USA, 24 Creek Circle, Boothwyn, PA 19061, 800-782-4347/610-497-8941, Fax: 610-497-8901, E-mail:
email@example.com, Web: www.gehrplastics.com.
one of the widest
ranges of extruded extra
tubular bars in
such as HDPE,
LDPE, PPS, nylon,
acetal and Delrin®
AF. Current size
from a combinations
of 22” outside diameter to 1.75” inside diameter.
Combining longer length availability than other traditional
engineering thermoplastics processes, these tubular
bars reduce machining costs and provide greater flexibility
in many applications.
For more information, contact Andrea Herrmann,
Plastifab Industries, 7777 Transcanadienne, Saint Laurent, Quebec, H4S 1L3, Canada, 800-361-4774/514-325-9840, Fax: 514-325-5222, E-mail: firstname.lastname@example.org,